Latest Papers

The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS.

Self-testing protocols enable the certification of quantum systems in a device-independent manner, i.e. without knowledge of the inner workings of the quantum devices under test. Here, we demonstrate this high standard for characterization routines with superconducting circuits, a prime platform for building large-scale quantum computing systems. We first develop the missing theory allowing for the self-testing of Pauli measurements. We then self-test Bell pair generation and measurements at the same time, performing a complete self-test in a system composed of two entangled superconducting circuits operated at a separation of 30 meters. In an experiment based on 17 million trials, we measure an average CHSH (Clauser-Horne-Shimony-Holt) S-value of 2.236. Without relying on additional assumptions on the experimental setup, we certify an average Bell state fidelity of at least 58.9% and an average measurement fidelity of at least 89.5% in a device-independent manner, both with 99% confidence. This enables applications in the field of distributed quantum computing and communication with superconducting circuits, such as delegated quantum computing.

A quantum system with a tunable bath temperature provides an additional degree of freedom for quantum simulators. Such a system can be realized by parametrically modulating the coupling between the system and the bath. Here, by coupling a transmon qubit to a lossy Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) mode, we experimentally create a tunable bath for the qubit mode. The effective temperature of this bath can be precisely controlled, ranging from negative to positive values. We show that the qubit can be thermalized to equilibrium with different population distributions under different parametric pumping conditions. We further extend our method to the third level of the transmon, demonstrating its potential utility beyond the two-level case. Our results provide a useful tool that can be readily integrated with quantum simulators that would benefit from a nontrivial photon population distribution.

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes with the cost of reduced qubit protection from the environment. Here, we present a novel multi-purpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

We propose a direct axion dark matter (DM) search using superconducting transmon qubits as quantum sensors. With an external magnetic field applied, axion DM generates an oscillating electric field which causes the excitation of the qubit; such an excitation can be regarded as a signal of the axion DM. We provide a theoretical consideration of the excitation process of the qubits taking into account the effects of the shielding cavity surrounding the qubits and estimate the signal rate for the axion DM detection. We also discuss the enhancement of the DM signal by using cavity resonance and entangled quantum sensors realized by a quantum circuit. Combining these two effects, we can reach the parameter region suggested by QCD axion models.

Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time with a median of 425 us and a maximum of (666 +/- 33) us, and an echo dephasing time with a median of 541 us and a maximum of (1057 +/- 138) us. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry.

The dominant contribution to the energy relaxation of state-of-the-art superconducting qubits is often attributed to their coupling to an ensemble of material defects which behave as two-level systems. These defects have varying microscopic characteristics which result in a large range of observable defect properties such as resonant frequencies, coherence times and coupling rates to qubits $g$. Here, we investigate strategies to mitigate losses to the family of defects that strongly couple to qubits ($g/2π\ge$ 0.5 MHz). Such strongly coupled defects are particularly detrimental to the coherence of qubits and to the fidelities of operations relying on frequency excursions, such as flux-activated two-qubit gates. To assess their impact, we perform swap spectroscopy on 92 frequency-tunable qubits and quantify the spectral density of these strongly coupled modes. We show that the frequency configuration of the defects is rearranged by warming up the sample to room temperature, whereas the total number of defects on a processor tends to remain constant. We then explore methods for fabricating qubits with a reduced number of strongly coupled defect modes by systematically measuring their spectral density for decreasing Josephson junction dimensions and for various surface cleaning methods. Our results provide insights into the properties of strongly coupled defect modes and show the benefits of minimizing Josephson junction dimensions to improve qubit properties.

Qudits provide a resource-efficient alternative to qubits for quantum information processing. The multilevel nature of the transmon, with its individually resolvable transition frequencies, makes it an attractive platform for superconducting circuit-based qudits. In this work, we systematically analyze the trade-offs associated with encoding high-dimensional quantum information in fixed-frequency transmons. Designing high $E_J/E_C$ ratios of up to 325, we observe up to 12 levels ($d=12$) on a single transmon. Despite the decreased anharmonicity, we demonstrate process infidelities $e_f < 3 \times 10^{-3}$ for qubit-like operations in each adjacent-level qubit subspace in the lowest 10 levels. Furthermore, we achieve a 10-state readout assignment fidelity of 93.8% with the assistance of deep neural network classification of a multi-tone dispersive measurement. We find that the Hahn echo time $T_{2E}$ for the higher levels is close to the limit of $T_1$ decay, primarily limited by bosonic enhancement. We verify the recently introduced Josephson harmonics model, finding that it yields better predictions for the transition frequencies and charge dispersion. Finally, we show strong $ZZ$-like coupling between the higher energy levels in a two-transmon system. Our high-fidelity control and readout methods, in combination with our comprehensive characterization of the transmon model, suggest that the high-$E_J/E_C$ transmon is a powerful tool for exploring excited states in circuit quantum electrodynamics.

Modular architectures are a promising approach to scale quantum devices to the point of fault tolerance and utility. Modularity is particularly appealing for superconducting qubits, as monolithically manufactured devices are limited in both system size and quality. Constructing complex quantum systems as networks of interchangeable modules can overcome this challenge through `Lego-like' assembly, reconfiguration, and expansion, in a spirit similar to modern classical computers. First prototypical superconducting quantum device networks have been demonstrated. Interfaces that simultaneously permit interchangeability and high-fidelity operations remain a crucial challenge, however. Here, we demonstrate a high-efficiency interconnect based on a detachable cable between superconducting qubit devices. We overcome the inevitable loss in a detachable connection through a fast pump scheme, enabling inter-module SWAP efficiencies at the 99%-level in less than 100 ns. We use this scheme to generate high-fidelity entanglement and operate a distributed logical dual-rail qubit. At the observed ~1% error rate, operations through the interconnect are at the threshold for fault-tolerance. These results introduce a modular architecture for scaling quantum processors with reconfigurable and expandable networks.

Readout of superconducting qubits faces a trade-off between measurement speed and unwanted back-action on the qubit caused by the readout drive, such as $T_1$ degradation and leakage out of the computational subspace. The readout is typically benchmarked by integrating the readout signal and choosing a binary threshold to extract the "readout fidelity". We show that readout fidelity may significantly overlook readout-induced leakage errors. Such errors are detrimental for applications that rely on continuously repeated measurements, e.g., quantum error correction. We introduce a method to measure the readout-induced leakage rate by repeatedly executing a composite operation - a readout preceded by a randomized qubit-flip. We apply this technique to characterize the readout of a superconducting qubit, optimized for fidelity across four different readout durations. Our technique highlights the importance of an independent leakage characterization by showing that the leakage rates vary from $0.12\%$ to $7.76\%$ across these readouts even though the fidelity exceeds $99.5\%$ in all four cases.

Niobium films are a key component in modern two-dimensional superconducting qubits, yet their contribution to the total qubit decay rate is not fully understood. The presence of different layers of materials and interfaces makes it difficult to identify the dominant loss channels in present two-dimensional qubit designs. In this paper we present the first study which directly correlates measurements of RF losses in such films to material parameters by investigating a high-power impulse magnetron sputtered (HiPIMS) film atop a three-dimensional niobium superconducting radiofrequency (SRF) resonator. By using a 3D SRF structure, we are able to isolate the niobium film loss from other contributions. Our findings indicate that microwave dissipation in the HiPIMS-prepared niobium films, within the quantum regime, resembles that of record-high intrinsic quality factor of bulk niobium SRF cavities, with lifetimes extending into seconds. Microstructure and impurity level of the niobium film do not significantly affect the losses. These results set the scale of microwave losses in niobium films and show that niobium losses do not dominate the observed coherence times in present two-dimensional superconducting qubit designs, instead highlighting the dominant role of the dielectric oxide in limiting the performance. We can also set a bound for when niobium film losses will become a limitation for qubit lifetimes.

We explore the interaction between a three-level atom and a single-mode quantized cavity, known as the three-level ladder-type Jaynes-Cummings model. By employing the exact solution of the Schrödinger equation, we investigate how the initial conditions of the atom influence the occupation probabilities of the atomic energy levels, average photon number, and the nonclassicality of light, assessed through the Mandel $\mathcal{Q} (t)$ parameter and the Wigner function. Our findings are rigorously validated through comprehensive numerical simulations, ensuring robust and consistent outcomes.

Superconducting quantum processors are one of the leading platforms for realizing scalable fault-tolerant quantum computation (FTQC). The recent demonstration of post-fabrication tuning of Josephson junctions using alternating-bias assisted annealing (ABAA) technique and a reduction in junction loss after ABAA illuminates a promising path towards precision tuning of qubit frequency while maintaining high coherence. Here, we demonstrate precision tuning of the maximum $|0\rangle\rightarrow |1\rangle$ transition frequency ($f_{01}^{\rm max}$) of tunable transmon qubits by performing ABAA at room temperature using commercially available test equipment. We characterize the impact of junction relaxation and aging on resistance spread after tuning, and demonstrate a frequency equivalent tuning precision of 7.7 MHz ($0.17\%$) based on targeted resistance tuning on hundreds of qubits, with a resistance tuning range up to $18.5\%$. Cryogenic measurements on tuned and untuned qubits show evidence of improved coherence after ABAA with no significant impact on tunability. Despite a small global offset, we show an empirical $f_{01}^{\rm max}$ tuning precision of 18.4 MHz by tuning a set of multi-qubit processors targeting their designed Hamiltonians. We experimentally characterize high-fidelity parametric resonance iSWAP gates on two ABAA-tuned 9-qubit processors with fidelity as high as $99.51\pm 0.20\%$. On the best-performing device, we measured across the device a median fidelity of $99.22\%$ and an average fidelity of $99.13\pm 0.12 \%$. Yield modeling analysis predicts high detuning-edge-yield using ABAA beyond the 1000-qubit scale. These results demonstrate the cutting-edge capability of frequency targeting using ABAA and open up a new avenue to systematically improving Hamiltonian targeting and optimization for scaling high-performance superconducting quantum processors.

We investigate the discrete time crystal (DTC) phase in a qubit ensemble, periodically driven by its interaction with either a photon or a transmon field, which is prone to dissipative leakage. We find this DTC to be robust against changes in detuning and anharmonicity of the field mode. Additionally, we study the system in the semiclassical limit, where mean-field approximations are valid, and demonstrate the utility of a suitable semiclassical Hamiltonian for this purpose. Intriguingly, we observe that the system exhibits a transient DTC even with only two qubits. We examine the dynamics of bipartite entanglement between the qubits and the field. Our findings show that the entanglement saturates to a steady value early in the dynamics, following a sudden peak. We find a strong positive correlation between this long-term entanglement value and the lifetime of the transient DTC, in a wide range of the parameter regime where the field is due to a lossy photon or a lossy transmon mode, with small detuning.

We devise a Floquet theory of longitudinal and dispersive readout in circuit QED. By studying qubits coupled to cavity photons and driven at the resonance frequency of the cavity $ω_{\rm r}$, we establish a universal connection between the qubit AC Stark shift and the longitudinal and dispersive coupling to photons. We find that the longitudinal coupling $g_\parallel$ is controlled by the slope of the AC Stark shift as function of the driving strength $A_{\rm q}$, while the dispersive shift $χ$ depends on its curvature. The two quantities become proportional to each other in the weak drive limit ($A_{\rm q}\rightarrow 0$). Our approach unifies the adiabatic limit ($ω_{\rm r}\rightarrow 0$) -- where $g_\parallel$ is generated by the static spectrum curvature (or quantum capacitance) -- with the diabatic one, where the static spectrum plays no role. We derive analytical results supported by exact numerical simulations. We apply them to superconducting and spin-hybrid cQED systems, showcasing the flexibility of faster-than-dispersive longitudinal readout.

Radiation-pressure interactions between harmonic oscillators have enabled exquisite measurement precision and control, made possible by using strong sideband drives, enhancing the coupling rate while also linearizing the interaction. In this letter, we demonstrate a strong intrinsic longitudinal coupling, a circuit quantum electrodynamics analogue of the radiation-pressure interaction, between a transmon qubit and a linear microwave resonator. A red-detuned sideband drive results in an on-demand Jaynes-Cummings interaction with a high on-off ratio. We measure a longitudinal coupling rate an order of magnitude larger than all decay rates, placing the device in the strong coupling regime. The intrinsic longitudinal interaction demonstrated here will enable the development of high-connectivity quantum information processing hardware and the exploration of the gravitational decoherence of quantum objects.

We present a simplified analog quantum simulation protocol for preparing quantum states that embed solutions of parabolic partial differential equations, including the heat, Black-Scholes and Fokker-Planck equations. The key idea is to approximate the heat equations by a system of hyperbolic heat equations that involve only first-order differential operators. This scheme requires relatively simple interaction terms in the Hamiltonian, which are the electric and magnetic dipole moment-like interaction terms that would be present in a Jaynes-Cummings-like model. For a d-dimensional problem, we show that it is much more appropriate to use a single d-level quantum system - a qudit - instead of its qubit counterpart, and d+1 qumodes. The total resource cost is efficient in d and precision error, and has potential for realisability for instance in cavity and circuit QED systems.

We study the thermal effects of the multiphoton Jaynes-Cummings model (JCM) using a thermofield dynamics (TFD) method. Letting the initial state of the whole system for the multiphoton JCM be a product of the ground state of an atom and a coherent state of a cavity field at finite temperature, we compute its time evolution. We evaluate a period of the collapse and revival of the Rabi oscillations and the relative entropy of coherence of the atom up to the second-order perturbation of the low-temperature expansion. We show that an intuitive estimation of the period matches the result of the perturbation theory of TFD well. In particular, we see that the period of the two-photon JCM hardly depends on the amplitude of the coherent state of the cavity field or the temperature. Numerical calculations suggest that the relative entropy of coherence of the two-photon JCM does not decay even for nonzero-temperature cases as time proceeds. By contrast, the relative entropyies of coherence for single-, three-, and four-photon JCMs decay as time proceeds for zero- and finite-temperature cases.

Quantum nonlocality describes a stronger form of quantum correlation than that of entanglement. It refutes Einstein's belief of local realism and is among the most distinctive and enigmatic features of quantum mechanics. It is a crucial resource for achieving quantum advantages in a variety of practical applications, ranging from cryptography and certified random number generation via self-testing to machine learning. Nevertheless, the detection of nonlocality, especially in quantum many-body systems, is notoriously challenging. Here, we report an experimental certification of genuine multipartite Bell correlations, which signal nonlocality in quantum many-body systems, up to 24 qubits with a fully programmable superconducting quantum processor. In particular, we employ energy as a Bell correlation witness and variationally decrease the energy of a many-body system across a hierarchy of thresholds, below which an increasing Bell correlation depth can be certified from experimental data. As an illustrating example, we variationally prepare the low-energy state of a two-dimensional honeycomb model with 73 qubits and certify its Bell correlations by measuring an energy that surpasses the corresponding classical bound with up to 48 standard deviations. In addition, we variationally prepare a sequence of low-energy states and certify their genuine multipartite Bell correlations up to 24 qubits via energies measured efficiently by parity oscillation and multiple quantum coherence techniques. Our results establish a viable approach for preparing and certifying multipartite Bell correlations, which provide not only a finer benchmark beyond entanglement for quantum devices, but also a valuable guide towards exploiting multipartite Bell correlation in a wide spectrum of practical applications.

We propose a hybrid quantum system consisting of a magnetic particle inductively coupled to two superconducting transmon qubits, where qubit-qubit interactions are mediated via magnons. We show that the system can be tuned into three different regimes of effective qubit-qubit interactions, namely a transverse ($XX + YY$), a longitudinal ($ZZ$) and a non-trivial $ZX$ interaction. In addition, we show that an enhanced coupling can be achieved by employing an ellipsoidal magnet, carrying anisotropic magnetic fluctuations. We propose a scheme for realizing two-qubit gates, and simulate their performance under realistic experimental conditions. We find that iSWAP and CZ gates can be performed in this setup with an average fidelity $\gtrsim 99 \% $ , while an iCNOT gate can be applied with an average fidelity $\gtrsim 88 \%$. Our proposed hybrid circuit architecture offers an alternative platform for realizing two-qubit gates between superconducting qubits and could be employed for constructing qubit networks using magnons as mediators.