Latest Papers

The temporal stability and reproducibility of qubit parameters are critical for the long-term operation and maintenance of superconducting quantum processors. In this work, we present a comprehensive longitudinal characterization of 27 frequency-tunable transmon qubits spanning over one year across four thermal cycles. Our results establish a distinct hierarchy of stability for superconducting hardware. We find that the intrinsic device parameters determining the qubit frequency and the baseline energy relaxation times ($T_1$) exhibit high robustness against thermal stress, characterized by frequency deviations typically confined within 0.5\% and non-degraded coherence baselines. In stark contrast, the environmental variables, specifically the background magnetic flux offsets and the microscopic landscape of two-level system (TLS) defects, undergo a significant stochastic reconfiguration after each cycle. By employing frequency-dependent relaxation spectroscopy and a quantitative metric, the $T_1$ Spectral Topography Fidelity, we demonstrate that thermal cycling acts as a ``hard reset'' for the local defect environment. This process introduces a level of spectral randomization equivalent to thousands of hours of continuous low-temperature evolution. These findings confirm that while the fabrication quality is preserved, the specific noise realization is statistically distinct for each thermal cycle, necessitating automated recalibration strategies for large-scale quantum systems.

The use of tantalum films for superconducting qubits has recently extended qubit coherence times significantly, primarily due to reduced dielectric losses at the metal-air interface. However, the choice of base material also influences the sensitivity to quasiparticle-induced decoherence. In this study, we investigate quasiparticle tunneling rates in niobium and tantalum-based offset-charge-sensitive qubits. Using a source of thermal radiation, we characterize the sensitivity of either material to infrared radiation and explore the impact of the infrared background through the targeted use of in-line filters in the wiring and ambient infrared absorbers. We identify both radiation channels as significant contributions to decoherence for tantalum but not for niobium qubits and achieve tunneling rates of 100 Hz and 300 Hz for niobium and tantalum respectively upon installation of infrared filters. Additionally, we find a time-dependence in the observed tunneling rates on the scale of days, which we interpret as evidence of slowly cooling, thermally radiating components in the experimental setup. Our findings indicate that continued improvements in coherence times may require renewed attention to radiative backgrounds and experimental setup design, especially when introducing new material platforms.

The superconducting qubit quantum computer is one of the most promising quantum computing architectures for large-scale integration due to its maturity and close proximity to the well-established semiconductor manufacturing infrastructure. From an education perspective, it also bridges classical microwave electronics and quantum electrodynamics. In this paper, we will review the basics of quantum computers, superconductivity, and Josephson junctions. We then introduce important technologies and concepts related to DiVincenzo's criteria, which are the necessary conditions for the superconducting qubits to work as a useful quantum computer. Firstly, we will discuss various types of superconducting qubits formed with Josephson junctions, from which we will understand the trade-off across multiple design parameters, including their noise immunity. Secondly, we will discuss different schemes to achieve entanglement gate operations, which are a major bottleneck in achieving more efficient fault-tolerant quantum computing. Thirdly, we will review readout engineering, including the implementations of the Purcell filters and quantum-limited amplifiers. Finally, we will discuss the nature and review the studies of two-level system defects, which are currently the limiting factor of qubit coherence time. DiVincenzo's criteria are only the necessary conditions for a technology to be eligible for quantum computing. To have a useful quantum computer, large-scale integration is required. We will review proposals and developments for the large-scale integration of superconducting qubit devices. By comparing with the application of electronic design automation (EDA) in semiconductors, we will also review the use of EDA in superconducting qubit quantum computer design, which is necessary for its large-scale integration.

Quantum computing promises to revolutionize several scientific and technological domains through fundamentally new ways of processing information. Among its most compelling applications is digital quantum simulation, where quantum computers are used to replicate the behavior of other quantum systems. This could enable the study of problems that are otherwise intractable on classical computers, transforming fields such as quantum chemistry, condensed matter physics, and materials science. Despite this potential, realizations of practical quantum advantage for relevant problems are hindered by imperfections of current devices. This also affects quantum hardware based on superconducting circuits which is among the most advanced and scalable platforms. The envisaged long-term solution of fault-tolerant quantum computers that correct their own errors remains out of reach mainly due to the associated qubit number overhead. As a result, the field has developed strategies that combine quantum and classical resources, exploit hardware-native operations, and employ error mitigation techniques to extract meaningful results from noisy data. This doctoral thesis contributes to this broader effort by exploring methods for advancing quantum simulation across the full computational stack, including hardware-level innovations, refined techniques for noise modeling and error mitigation, and algorithmic improvements enabled by efficient measurement processing.

We investigate how initial intrasystem entanglement influences the entropy generated in atomic systems interacting with a photonic environment in several generalizations of the Jaynes-Cummings model with two or more subsystems. Since the initial entanglement does not uniquely determine the final entropy, we focus on ensemble-averaged behavior. We consider ensembles of initial system states, including pure and mixed Haar-random states, ensembles with fixed average energy or fixed mixedness, and varying initial photon numbers in the environment. In all cases, we observe a positive correlation between the initial entanglement and the entropy growth, although the fractional contribution of the initial entanglement varies. Our results emphasize the role of intrasystem correlations as a factor contributing to entropy growth in quantum informational processes.

Mid-circuit measurements (MCMs) are critical components of the quantum error correction protocols expected to enable utility-scale quantum computing. MCMs can be modeled by quantum instruments (a type of quantum operation or process), which can be characterized self-consistently using gate set tomography. However, experimentally estimated quantum instruments are often hard to interpret or relate to device physics. We address this challenge by adapting the error generator formalism -- previously used to interpret noisy quantum gates by decomposing their error processes into physically meaningful sums of "elementary errors" -- to MCMs. We deploy our new analysis on a transmon qubit device to tease out and quantify error mechanisms including amplitude damping, readout error, and imperfect collapse. We examine in detail how the magnitudes of these errors vary with the readout pulse amplitude, recover the key features of dispersive readout predicted by theory, and show that these features can be modeled parsimoniously using a reduced model with just a few parameters.

Superconducting quantum circuits typically use capacitive charge-based linear coupling schemes to control interactions between elements such as qubits. While simple and effective, this coupling scheme makes it difficult to satisfy competing circuit design requirements such as maintaining large qubit anharmonicity and coherence along with a high degree of qubit connectivity and packing density. Moreover, tunable interactions using linear coupling elements produce dynamical variations in mode hybridization, which can induce non-adiabatic transitions, resulting in leakage errors and limiting gate speeds. In this work we attempt to address these challenges by proposing a junction-based coupling architecture based on SQUID (superconducting quantum interference device) couplers with relatively small Josephson energies. SQUID couplers provide intrinsic cross-Kerr interactions that can be controlled by external fluxes and that do not rely on mode hybridization. The small Josephson energies of the coupler maintain the interaction at a perturbative scale, which limits undesired higher-order mixing between coupled elements while achieving a sufficiently strong cross-Kerr interaction originating from diagonal coupling elements. Based on these properties, we show that a SQUID coupler can be used to implement a fast, adiabatic, and high-fidelity controlled-Z gate without introducing extra modes, and the operation is robust against junction asymmetry for high-frequency qubits. Although unconventional crosstalk may arise due to junction asymmetries and parasitic hybridization with spectator qubits, we show that these effects are sufficiently small for realistic circuit parameters. As an example of the utility of such junction-based coupling schemes, we present a scalable tiling strategy for a miniaturized superconducting quantum processor based on merged-element transmon qubits.

Incorporating van der Waals (vdW) superconductors into Josephson elements extends circuit-QED beyond conventional Al/AlO$_x$/Al tunnel junctions and enables microwave probes of unconventional condensates and subgap excitations. In this work, we realize a flux-tunable transmon whose nonlinear inductive element is an Al/AlO$_x$/4Hb-TaS$_2$ Josephson junction. The tunnel barrier is formed by sequential deposition and full in-situ oxidation of ultrathin Al layers on an exfoliated 4Hb-TaS$_2$ flake, followed by deposition of a top Al electrode, yielding a robust, repeatable hybrid junction process compatible with standard transmon fabrication. Embedding the device in a three-dimensional copper cavity, we observe a SQUID-like flux-dependent spectrum that is quantitatively reproduced by a standard dressed transmon--cavity Hamiltonian, from which we extract parameters in the transmon regime. Across measured devices we obtain sub-microsecond energy relaxation ($T_1$ from $0.08$ to $0.69~μ$s), while Ramsey measurements indicate dephasing faster than our $16$ ns time resolution. We also find a pronounced discrepancy between the Josephson energy inferred from spectroscopy and that expected from the Ambegaokar--Baratoff relation using room-temperature junction resistances, pointing to nontrivial junction physics in the hybrid Al/AlO$_x$/4Hb-TaS$_2$ system. Although we do not resolve material-specific subgap modes in the present geometry, this work establishes a practical route to integrating 4Hb-TaS$_2$ into coherent quantum circuits and provides a baseline for future edge-sensitive designs aimed at enhancing coupling to boundary and subgap degrees of freedom in vdW superconductors.

Operating superconducting qubits at dynamical sweet spots (DSSs) suppresses decoherence from low-frequency flux noise. A key open question is how long coherence can be extended under this strategy and what fundamental limits constrain it. Here we introduce a fully parameterized, multi-objective periodic-flux modulation framework that simultaneously optimizes energy relaxation $T_1$ and pure dephasing $T_φ$, thereby quantifying the tradeoff between them. For fluxonium qubits with realistic noise spectra, our method enhances $T_φ$ by a factor of 3-5 compared with existing DSS strategies while maintaining $T_1$ in the hundred-microsecond range. We further prove that, although DSSs eliminate first-order sensitivity to low-frequency noise, relaxation rate cannot be reduced arbitrarily close to zero, establishing an upper bound on achievable $T_1$. At the optimized working points, we identify double-DSS regions that are insensitive to both DC and AC flux, providing robust operating bands for experiments. As applications, we design single- and two-qubit control protocols at these operating points and numerically demonstrate high-fidelity gate operations. These results establish a general and useful framework for Pareto-front engineering of DSSs that substantially improves coherence and gate performance in superconducting qubits.

This work presents a pedagogical and self-contained derivation of the first-order effective Hamiltonian for the two-mode Jaynes-Cummings model in the dispersive regime. A perturbative unitary transformation removes nonresonant atom-field terms, revealing dispersive frequency shifts leading to an atom-induced effective beam-splitter interaction between the field modes. The resulting Hamiltonian is diagonalized through a simple geometric rotation in the two-mode bosonic space, providing a transparent interpretation of the underlying dynamics. The exposition emphasized clarity and physical insight, making effective Hamiltonian methods accessible for teaching and learning in multimode light-matter interactions.

The Superconducting Quasiparticle-Amplifying Transmon (SQUAT) is a new sensor architecture for THz (meV) detection based on a weakly charge-sensitive transmon directly coupled to a transmission line. In such devices, energy depositions break Cooper pairs in the qubit capacitor islands, generating quasiparticles. Quasiparticles that tunnel across the Josephson junction change the transmon qubit parity, generating a measurable signal. In this paper, we present the design of first-generation SQUATs and demonstrate an architecture validation. We summarize initial characterization measurements made with prototype devices, comment on background sources that influence the observed parity-switching rate, and present experimental results showing simultaneous detection of charge and quasiparticle signals using aluminum-based SQUATs.

Superconducting qubit networks (SQNs) embedded in a low-dissipative resonator is a promising device allowing one not only to establish the collective quantum dynamics on a macroscopic scale but also to greatly enhance the sensitivity of detectors of microwave photons. A quantum ac Stark effect provided by coupling between an SQN and microwave photons of a resonator, leads to a strong nonlinear interaction between photons. Here, we present a two-tone spectroscopy experiment in which a set of 10 superconducting flux qubits is coupled to the input R- resonator and the output T- transmission line. An external microwave pump field close to the resonance frequency populates macroscopically the resonator mode as a Bose-Einstein condensate, while a second probe beam scans the resonances referred also as Bogoliubov-like excitations. The corresponding excitation frequency measured from the transmission coefficient, |S21(f)| displays an abrupt change of the resonant dip position once the power of the pump field overcomes a critical value Pcr. This sharp shift occurs in a narrow region of pump frequencies, and can be tuned by an applied magnetic field. It is a signature of bistability of the photon number inside the resonator, in agreement with theory.

We report the experimental realization of strong longitudinal (ZZ) coupling between two superconducting transmon qubits achieved solely through capacitive engineering. By systematically varying the qubit frequency detuning, we measure cross-Kerr inter-qubit interaction strengths ranging from 10 MHz up to 350 MHz, more than an order of magnitude larger than previously observed in similar capacitively coupled systems. In this configuration, the qubits enter a strong-interaction regime in which the excitation of one qubit inhibits that of its neighbor, demonstrating a dynamical blockade mediated entirely by the engineered ZZ coupling. Circuit quantization simulations accurately reproduce the experimental results, while perturbative models confirm the theoretical origin of the energy shift as a hybridization between the computational states and higher-excitation manifolds. We establish a robust and scalable method to access interaction-dominated physics in superconducting circuits, providing a pathway towards solid-state implementations of globally controlled quantum architectures and cooperative many-body dynamics.

We develop a compact transmon emitter/detector (TED) superconducting circuit and demonstrate its dual functionality as a single-photon source and detector. In our setup, photons emitted by a source TED are transmitted via a meter-long coaxial cable, routed through a circulator, and captured by a measurement TED. Both TED modules operate with nominally identical parameters, highlighting the flexibility of this novel architecture. Furthermore, we introduce an efficient microwave photon detection scheme tailored to the TED. Using this setup, we detect 60% of the emitted Fock state photons and infer a 95% detection efficiency at the input of the measurement TED, which we calibrate against coherent state measurements. The reset and photon emission/detection processes each require approximately $2\,μs$, yielding a minimum protocol duration of $4\,μs$ as constrained by our chosen TED parameters. Ultimately, the TED demonstrates a new use case for the recently developed double transmon coupler (DTC): a compact, drop-in, tunable, and transition-selective link between a coherent data transmon and a waveguide. Circuits like the TED will play a vital role in quantum information processing by facilitating unconditional fast reset, enabling microwave photon metrology, and serving as nascent quantum communication interfaces (QCIs). QCIs mediate entanglement distribution between quantum processing units (QPUs) within a cryostat or interface with microwave-to-optical transducers for long-range quantum networking.

Superconducting quantum circuits derive their nonlinearity from the Josephson energy-phase relation. Besides the fundamental $\cosφ$ term, this relation can also contain higher Fourier harmonics $\cos(kφ)$ corresponding to correlated tunneling of $k$ Cooper pairs. The parity of the dominant tunneling process, i.e.~whether an odd or even number of Cooper pairs tunnel, results in qualitatively different properties, and controlling this opens up a wide range of applications in superconducting technology. However, access to even-dominated regimes has remained challenging and has so far relied on complex multi-junction or all-hybrid architectures. Here, we demonstrate a simple "harmonic parity qubit" (HPQ); an element that combines two aluminum-oxide tunnel junctions in parallel to a gate-tunable InAs/Al nanowire junction forming a SQUID, and use spectroscopy versus flux to reconstruct its energy-phase relation at 85 gate voltage points. At half flux quantum, the odd harmonics of the Josephson potential can be suppressed by up to two orders of magnitude relative to the even harmonics, producing a double-well potential dominated by even harmonics with minima near $\pmπ/2$. The ability to control harmonic parity enables supercurrent carried by pairs of Cooper pairs and provides a new building block for Fourier engineering in superconducting circuits.

In this paper, we study the two-time Leggett-Garg (LG) inequalities of a quantum optical model that appears in the Josephson-junction quantum bit (qubit) interacting with an external magnetic flux. This model is a natural extension of an exactly solvable model whose interaction between a qubit and single-mode photons is given by a product of the Pauli $z$ operator of the qubit and a linear combination of annihilation and creation operators of the photons. By contrast, a photon's part of the interaction of our model is given by the square of the linear combination. Because our model is not solvable, we approximately investigate its time evolution up to the second-order perturbation. Our numerical calculations show that violation of the LG inequality diminishes as the temperature increases. Moreover, it exhibits power laws of the temperature, whose exponents vary depending on the coupling constant of the interaction between the qubit and photons. The violation of the LG inequality decreases and becomes less sensitive to the temperature as the coupling constant of the interaction gets larger.

Bell or Clauser-Horne-Shimony-Holt (CHSH) tests on superconducting quantum processors are commonly interpreted under the assumption that repeated circuit executions sample a single, stationary preparation ensemble. Here we show that this assumption can be violated on contemporary hardware, with direct implications for the interpretation of observed Bell violations. We introduce an ensemble-divergence framework in which slow temporal drift of the preparation process induces context-dependent effective ensembles, even when measurement independence and locality are preserved. This leads to a relaxed Bell bound $|S| \le 2 + 6δ_{\mathrm{ens}}$, where $δ_{\mathrm{ens}}$ quantifies preparation nonstationarity. Because $δ_{\mathrm{ens}}$ is not directly observable, we develop an operational witness $δ_{\mathrm{op}}$ based on bin-resolved outcome statistics for fixed measurement channels. Using Pauli-axis measurements on IBM superconducting processors, we observe statistically significant operational drift that persists after full two-qubit readout mitigation, ruling out measurement artifacts. In contrast, drift extracted from CHSH-optimal measurements is eliminated by mitigation, demonstrating that such settings are unsuitable for diagnosing preparation nonstationarity. We further show that the observed Bell violations imply only modest ensemble divergences, comparable in scale to those required in Hall-type measurement-dependence models, but arising here solely from preparation drift combined with experimental scheduling. Our results identify a preparation-dependent loophole relevant to Bell tests on noisy intermediate-scale quantum devices and highlight the necessity of drift-aware protocols for reliable quantum certification.

We report a three-dimensional lumped-element multimode microwave resonator that enables homogeneous collective manipulation and dispersive readout of a macroscopic spin ensemble. By exploiting geometric symmetry, two antisymmetric modes with strongly suppressed cross-talk are engineered to spatially overlap and couple to the same ensemble at distinct frequencies. Using negatively charged nitrogen-vacancy centers in diamond at 28 mK, we observe collective strong coupling with a coupling strength of 5.0 MHz and demonstrate non-destructive dispersive readout via a detuned mode. The compact design, tunable coupling, and high field homogeneity make this resonator a versatile device for hybrid spin-photon systems and multimode solid-state quantum technologies.

Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.

Quantum device measurements are powerful tools to probe dark matter interactions. Among these, transmon qubits stand out for their ability to suppress external noise while remaining highly sensitive to tiny energy deposits. Ambient galactic halo dark matter interacting with electrons can deposit energy in the qubit, leading to changes in its decoherence time. Recent measurements of transmons have consistently measured, in various experimental setups, a residual contribution to the decoherence time unexplained by thermal noise or known external sources. We use such measurements to set the most stringent laboratory-based constraints to date on dark matter-electron scattering at the keV scale and competitive constraints on dark photon absorption.