Latest Papers

Frequency-tunable superconducting transmon qubits are a cornerstone of scalable quantum processors, yet their performance is often degraded by sensitivity to low-frequency flux noise. Here we present a doubly-connected gradiometric transmon (the ``8-mon") that incorporates a nano-airbridge to link its two loops. This design preserves full electrical tunability and remains fully compatible with standard X-mon control and readout, requiring no additional measurement overhead. The airbridge interconnect eliminates dielectric loss, which enables the 8-mon to achieve both energy relaxation times $T_{\rm 1}$ comparable to reference X-mons and, in the small flux-bias regime, a nearly threefold enhancement in Ramsey coherence time $T_{\rm 2}^*$. This improved $T_{\rm 2}^*$ reaches the same order as $T_{\rm 1}$ without employing echo decoupling. The device also exhibits superior long-term frequency stability even without any magnetic field shielding. We develop a spatially correlated flux-noise model whose simulations quantitatively reproduce the experimental coherence trends, revealing the coexistence of short- and long-correlation-length magnetic noise in the superconducting chip environment. By unifying high tunability with intrinsic flux-noise suppression through a robust geometric design, the 8-mon provides a practical pathway toward more coherent and stable superconducting quantum processors.

We propose an efficient two-stage protocol for generating distant entanglement in a magnon-mediated hybrid quantum system, where magnons serve dual roles as both interaction mediators and qubits. This integrated design reduces the physical component count while leveraging the inherent advantages of magnons, such as their strong coupling via magnetic dipole interactions, low dissipation, and high integrability. In our setup, a superconducting resonator interfaces between a local superconducting qubit (SQ) and a local magnonic system (QM1), which is waveguide-coupled to a remote magnonic system (QM2). The protocol comprises two stages: (i) deterministic Bell-state generation between the SQ and QM1 using shortcuts to adiabaticity, and (ii) coherent state transfer to QM2 via engineered Hamiltonian dynamics. This adiabatic characteristic enhances robustness against environmental dissipation. Numerical simulations under realistic noise conditions confirm strong resilience to decoherence, achieving fidelity $F > 0.90$ and negativity $\mathcal{N}_2 > 0.40$. These results establish the protocol as a scalable and practical building block for distributed quantum networks.

Precise gravitational measurements are vital for geophysics and inertial navigation, but compact gravimeters with high measurement bandwidth remain difficult to realize. We propose and analyze a chip-scale superconducting gravimeter in which a flux-tunable transmon qubit is coupled to a high quality factor ($Q_m$) nanomechanical beam. The beam is embedded in a SQUID loop placed in parallel with the qubit's flux-tunable SQUID; gravity induced beam displacement therefore modulates the qubit frequency through the SQUID flux and is mapped onto the qubit's geometric phase. A stroboscopic readout at mechanical revival times suppresses qubit mechanics dephasing, yielding a projected sensitivity of $10^2$--$10^3\,\mathrm{nGal}/\sqrt{\mathrm{Hz}}$ with sub-millisecond interrogation times. Electrical \emph{in situ} tunability and microwave-based calibration make this architecture a practical route toward compact, high-bandwidth on-chip gravimetry.

A common challenge in superconducting quantum circuits is the trade-off between strong coupling and computational subspace integrity. We present Mathieu control, which uses a non-resonant two-photon drive to create a selective nonlinear frequency shift. This shift modifies interactions while preserving qubit states, enabling continuous tuning of the ZZ coupling, including full suppression, and integrating single- and two-qubit gates with low leakage. For a qubit-coupler-qubit device, it allows independent ZZ control, facilitating a programmable Heisenberg (XXZ) Hamiltonian. Extended to a five-qubit chain, the system can be reconfigured to simulate dynamics of quantum magnetic phases. Mathieu control thus provides a framework for high-fidelity quantum logic and programmable simulation.

Boundary conditions in confined geometries and measurement interactions in quantum mechanics share a common structural role: both select a preferred basis by determining which states are compatible with the imposed constraint. This paper develops this perspective for circuit QED dispersive readout through a first-principles derivation starting from the circuit Lagrangian. The transmon qubit terminating a transmission line resonator provides a frequency-dependent boundary condition whose pole structure encodes the qubit's transition frequencies; different qubit states yield different resonator frequencies. Two approximations, linear response and a pole-dominated expansion valid near resonance, reduce the boundary function to a rational form in the Sturm-Liouville eigenparameter. The extended Hilbert space of the Fulton-Walter spectral theory then provides a framework for the dressed-mode eigenvalue problem conditional on the qubit state. The dispersive shift and vacuum Rabi splitting emerge from the transcendental eigenvalue equation, with the residues determined by matching to the splitting: $δ_{ge} = 2Lg^2ω_q^2/v^4$, where $g$ is the vacuum Rabi coupling. A level repulsion theorem guarantees that no dressed mode frequency coincides with a transmon transition. For two qubits with matched dispersive shifts, odd-parity states become frequency-degenerate; true parity-only measurement requires engineered suppression of linear dispersive terms.

Superconducting qubits have emerged as a leading platform for realizing quantum computers. Accurate modeling of these devices is essential for predicting performance, improving design, and optimizing control. Many modeling approaches currently rely on lumped circuit approximations or other simplified treatments that can be limited in resolving the interplay between the qubit dynamics and the electromagnetic circuitry, leading to significant experimental deviations from numerical predictions at times. To address many of these limitations, methods that self-consistently solve the Schrödinger equation for qubit dynamics with the classical Maxwell's equations have been developed and shown to accurately predict a wide range of effects related to superconducting qubit control and readout. Despite these successes, these methods have not been able to consider multi-qubit effects that give rise to qubit-qubit entanglement. Here, we address this by rigorously deriving how multi-qubit coupling effects between transmon qubits can be embedded into Maxwell-Schrödinger methods. To support this, we build on earlier first-principles derivations of Maxwell-Schrödinger methods for the specific case of two transmon qubits coupled together through a common electromagnetic system in the dispersive regime. To aid in validating aspects of the Maxwell-Schrödinger framework, we also provide a new interpretation of Maxwell-Schrödinger methods as an efficient simulation strategy to capture the class of non-Markovian open quantum system dynamics. Our results demonstrate that these effects can give rise to strong classical crosstalk that can significantly alter multi-qubit dynamics, which we demonstrate for the cross-resonance gate. These classical crosstalk effects have been noted in cross-resonance experiments, but previous quantum theory and device analysis could not explain their origin.

Superconducting quantum circuits operate at millikelvin temperatures, typically requiring independent microwave cables for each qubit for connecting room-temperature control and readout electronics. However, scaling to large-scale processors hosting hundreds of qubits faces a severe input/output (I/O) bottleneck, as the dense cable arrays impose prohibitive constraints on physical footprint, thermal load, wiring complexity, and cost. Here we demonstrate a complete optical I/O architecture for superconducting quantum circuits, in which all control and readout signals are transmitted exclusively via optical photons. Employing a broadband traveling-wave Brillouin microwave-to-optical transducer, we achieve simultaneous frequency-multiplexed optical readout of two qubits. Combined with fiber-integrated photodiode arrays for control signal delivery, this closed-loop optical I/O introduces no measurable degradation to qubit coherence times, with an optically driven single-qubit gate fidelity showing only a 0.19% reduction relative to standard microwave operation. These results establish optical interconnects as a viable path toward large-scale superconducting quantum processors, and open the possibility of networking multiple superconducting quantum computers housed in separate dilution refrigerators through a centralized room-temperature control infrastructure.

Most quantum error correction (QEC) protocols for superconducting qubits assume spatially and temporally uncorrelated decoherence events; however, recent evidence suggests that cosmic radiation induces spatially correlated errors. We present a platform that sandwiches a superconducting transmon qubit between two microwave kinetic inductance detector (MKID) arrays, enabling real-time detection of radiation-induced phonon bursts. By synchronizing MKID event detection with single-shot measurements of qubit energy relaxation ($T_1$) and phase coherence ($T_2$), we observe statistically significant reductions in both $T_1$ and $T_2$-up to 30.5%-immediately following dual MKID events attributed to penetrating muons. Our findings directly link radiating events to correlated qubit decoherence. Furthermore, our experimental platform provides a foundation for systematic studies of radiation effects, the development of shielding and mitigation techniques, and the refinement of error-correction algorithms tailored to correlated noise sources.

We present a lattice-renormalized formalism for configurational tunneling two-level systems (TLS) that overcomes limitations of minimum-energy-path and light-particle models. Derived from the nuclear Hamiltonian, our formulation introduces composite phonon coordinates to capture lattice distortions between degenerate potential wells. This approach resolves deficiencies in prior models and enables accurate computation of tunnel splittings and excitation spectra for hydrogen-based TLS in bcc Nb. Our results bound experimental tunnel splittings and reveal strong anharmonic couplings between tunneling atoms and lattice phonons, establishing a direct link between TLS dynamics and phonon-mediated strain interactions. The formalism further generalizes to multi-level systems (MLS), providing insight into defect-induced decoherence in superconducting qubits and guiding strategies for materials design to suppress TLS-related loss.

Crosstalk between qubits fundamentally limits the scalability of quantum processors, necessitating physics-based models that can handle the complexity of large qubit arrays. Here, we develop a comprehensive theoretical and experimental framework that captures residual interactions between both adjacent and non-adjacent qubits in fixed-frequency transmon lattices. The model integrates the combined effects of exponential localization in banded capacitance matrices, suppression of virtual couplings through detuning products across intermediate modes, and evanescent decay of below-cutoff electromagnetic fields, yielding predictive scaling relations for coupling strength as a function of spatial separation and spectral detuning. Experimental characterization of a $4 \times 4$ superconducting-qubit lattice with inductive shunt pillars reveals exponential spatial decay and frequency-dependent suppression consistent with theoretical predictions, achieving quantitative agreement for all nearest-neighbor couplings across the \qtyrange[range-phrase = --, range-units = single]{4}{6}{\giga\hertz} operating range. Our results show that standard dispersive Hamiltonian approximations systematically overestimate long-range coupling when spatial and spectral dependencies are neglected; these errors propagate into circuit simulation and design strategies. Our framework provides design guidance for crosstalk mitigation in larger-scale quantum processors under realistic fabrication constraints, addressing a bottleneck in scalability.

Developing fault-tolerant quantum processors with error correction demands large arrays of physical qubits whose key performance metrics (coherence times, control fidelities) must remain within specifications over both short and long timescales. Here we investigated the temporal stability of subtractively fabricated CMOS-compatible superconducting transmon qubits. During a single cooldown and over a period of 95 hours, we monitored several parameters for 8 qubits, including coherence times $T_1$ and $T_2^*$, which exhibit fluctuations originating primarily from the interaction between two-level system (TLS) defects and the host qubit. We also demonstrate that subtractively-fabricated superconducting quantum devices align with the theoretical predictions that higher mean lifetimes $T_1$ correspond to larger fluctuations. To assess long-term stability, we tracked two representative qubits over 10 cooldown cycles spanning more than one year. We observed an average total downward shift in both qubit transition frequencies of approximately 61 MHz within the thermal cycles considered. In contrast, readout resonator frequencies decreased only marginally. Meanwhile, $T_1$ exhibits fluctuations from cycle to cycle, but maintains a stable baseline value.

Scaling superconducting quantum processors is fundamentally limited by the escalating complexity of cryogenic wiring and the detrimental effects of microwave crosstalk and Purcell decay. This paper proposes a novel architecture based on frequency-multiplexed millimeter-wave superconducting qubits, integrating an on-chip cryogenic nonreciprocal space-time-periodic Josephson frequency multiplier as a universal control bus. The bus replaces multiple high-frequency XY drive lines with a single low-frequency input tone, which is parametrically converted into a comb of high-order harmonics, each resonantly addressing a distinct qubit. The nonreciprocal nature of the bus provides intrinsic isolation that suppresses Purcell decay and reduces coherent crosstalk by more than $98\%$ compared to a conventional reciprocal shared drive line. Full error-budget analysis demonstrates that the architecture can maintain gate errors below the fault-tolerance threshold for arrays exceeding 25 qubits, converting a crosstalk-dominated error budget into one primarily limited by intrinsic material coherence. Theoretical modeling based on a non-Markovian master equation further indicates that the engineered environment enables information backflow, offering a pathway to enhanced coherence. This integrated, frequency-multiplexed, and nonreciprocal control bus offers a compelling route toward dramatic I/O simplification, improved noise resilience, and scalable high-coherence superconducting quantum processors.

The anisotropic Rabi model (ARM), which features tunable Jaynes-Cummings (JC) and anti-Jaynes-Cummings (AJC) interactions, has remained challenging to realize fully. We present a circuit QED architecture featuring a qubit, a resonator, and a flux-tunable coupler that provides complete dynamic control over the ARM Hamiltonian. By leveraging simultaneous capacitive and inductive couplings, we can in-situ tune the interaction from the pure JC to the pure AJC regime without requiring external parametric modulation. This dynamic control enables useful quantum measurement and coherence capabilities, including dispersive shift cancellation for protection against photon shot-noise dephasing, and Purcell-suppressed readout. Our work establishes a versatile platform for exploring the ARM's full parameter space and its broader applications in quantum information processing.

The aim of this letter is to compute the evolution of some expected values, such as the field operators $a^\pm$, quadratures and atomic inversion, under supersymmetric (SUSY) partner Hamiltonians associated to the Jaynes-Cummings Hamiltonian of quantum optics. This kind of SUSY partners are characterized by having spectra which differ in a finite number of energy levels. We wish to elucidate if the partner connection has any influence on these expected values. In particular, we want also to know in which way the classical and revival times are affected by such SUSY partners.

Three-body interactions are fundamental for realizing novel quantum phenomena beyond pairwise physics, yet their implementation -- particularly among distinct quantum systems -- remains challenging. Here, we propose a hybrid quantum architecture comprising a magnonic mode (in a YIG sphere), an Andreev spin qubit (ASQ), and a superconducting qubit (SCQ), to realize a strong three-body interaction at the single-quantum level. Leveraging the spin-dependent supercurrent and circuit-integration flexibility of the ASQ, it is possible to engineer a strong tripartite coupling that jointly excites both qubits upon magnon annihilation (or excites magnons and SCQs upon ASQ deexcitation). Through analytical and numerical studies, we demonstrate that this interaction induces synchronized collapse and revival in qubit populations when the magnon is initially prepared in a coherent state. Notably, during the collapse region -- where populations remain static -- the entanglement structure undergoes a dramatic and continuous reorganization. We show that the genuine tripartite entanglement is redistributed into bipartite entanglement between the two qubits, and vice versa, with the total entanglement conserved. These phenomena, unattainable via two-body couplings, underscore the potential of three-body interactions for exploring intrinsically new quantum effects and advancing hybrid quantum information platforms.

Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to $\sim10\%$ of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.

Quantum communication between remote chips is essential for realizing large-scale superconducting quantum computers. For such communication, itinerant microwave photons propagating through transmission lines offer a promising approach. However, demonstrations to date have relied on frequency-tunable circuit elements to compensate for fabrication-related parameter variations between sender and receiver devices, introducing control complexity and limiting scalability. In this work, we demonstrate deterministic quantum state transfer and remote entanglement generation between fixed-frequency superconducting qubits on separate chips. To compensate for the sender-receiver mismatch, we employ a frequency-tunable photon-generation technique which enables us to adjust the photon frequency without modifying circuit parameters. To enhance the frequency tunability, we implement broadband transfer resonators composed of two coupled coplanar-waveguide resonators, achieving a bandwidth of more than 100 MHz. This broadband design enables successful quantum communication across a 30-MHz range of photon frequencies between the remote qubits. Quantum process tomography reveals state transfer fidelities of around 79% and Bell-state fidelities of around 73% across the full frequency range. Our approach avoids the complexity of the control lines and noise channels, providing a flexible pathway toward scalable quantum networks.

State-of-the-art superconducting qubits rely on a limited set of thin-film materials. Expanding their materials palette can improve performance, extend operating regimes, and introduce new functionalities, but conventional thin-film fabrication hinders systematic exploration of new material combinations. Van der Waals (vdW) materials offer a highly modular crystalline platform that facilitates such exploration while enabling gate-tunability, higher-temperature operation, and compact qubit geometries. Yet it remains unknown whether a fully vdW superconducting qubit can support quantum coherence and what mechanisms dominate loss at both low and elevated temperatures in such a device. Here we demonstrate quantum-coherent merged-element transmons made entirely from vdW Josephson junctions. These first-generation, fully crystalline qubits achieve microsecond lifetimes in an ultra-compact footprint without external shunt capacitors. Energy relaxation measurements, together with microwave characterization of vdW capacitors, point to dielectric loss as the dominant relaxation channel up to hundreds of millikelvin. These results establish vdW materials as a viable platform for compact superconducting quantum devices.

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

Nitrogen-vacancy color centers in diamond have proven themselves as a good, sensitive element for the measurement of magnetic fields. While the mainstream of magnetometers based on NV centers uses so-called optically detected magnetic resonance, there has recently been a suggestion to use dispersive readout of a dielectric cavity to enhance the sensitivity of magnetometers. Here, we demonstrate that the dispersive readout approach can be significantly improved if a two-channel scheme is considered.